🎄PACAGE CONTENT:
- 1 x Fingertip Oximeter
- 1 x Lanyard
- 1 x English user manual
- 1 x Storage Box
😉TIPS (without battery)
🎄OXIMETER INTRODUCTION:
✔BRIGHT OLED DISPLAY & MULTI-DIRECTION DISPLAY
Advanced dual OLED display technology helps the user get a brighter & sharper vision of the information from a pulse oximeter. Also, the user can see the Pulse Rate bar graph and Plethysmograph in this OLED display. Four direction display can allow the user to view conveniently the tested result in any direction.
✔ACCURATE & RELIABLE
Fingertip Pulse Oximeter can accurately determine your SpO2 (blood oxygen saturation levels) and PR (pulse rate) after clinical and professional tests, Fast SpO2 readings, pulse measurements and display it conveniently on a large digital bright OLED display.
✔ALARM & PULSE RATE SOUND
When detecting your pulse, the pulse oximeter will make a sound which indicates a pulse beating rate. If the pulse oximeter has detected your pulse rate and SpO2 in an irregular condition, the pulse oximeter will make an alert to warn the user to be careful of their body condition. Also, you can set the limit by yourself and whether to enable the alarm sound effect.
✔LIGHTWEIGHT, COMPACT & EASY TO USE
Light and compact, accommodates a wide range of finger sizes, User only needs to put your finger in the finger pulse oximeter tested chamber, the result will be shown in 8 seconds. In the absence of signals, the product would power-off automatically after 8 seconds.
🎄OXIMETER SPECIFICATION:
✔Display: OLED, 2 color display, waveform display
✔SpO2 Measurement range: 70~99%
✔Resolution: ±1%
✔Accuracy: ±2% (70%~99%), unspecified (<70%)
✔Pulse rate Measurement range: 30~240 bpm
✔Resolution: ±1%
✔Accuracy: ±2bpm or ±2% (select larger)
✔Low Perfusion ≤0.4%
✔Power 1.5V (AAA size) alkaline battery x 2 (Not included )
✔Supply voltage: 2.6~3.6V
✔Working current≤30mA
✔Automatic power-off Automatically power off when no signal in the oximeter for more than 8S
🎄OPERATION INSTRUCTIONS:
1. Install 2 AAA batteries into battery cassette before covering its cover.
2. Plug one finger into rubber hole of the Oximeter (it is best to plug the finger thoroughly) before releasing the clamp with the nail upwards.
3. Press button on the front panel; (Note: if equipped with automatic startup function refers to clamp oximeter, need not press the button, the instrument has 5s automatic signal detection function, directly inserted into the finger, instrument is automatically switched on timely)
4. Don't tremble your finger when the Oximeter is working. Your body is not recommended on moving status.
5. Press the button on the front panel, if we want change display direction;
6. Read relevant datum from display screen.
7. The instrument has the function of sleep, no signal will enter standby state of sleep.
8. Please replace new batteries when OLED indicates the batteries are in low power.
😉TIPS: When plugging your finger into the Oximeter, your nail surface must be upward.
Declaration: Please use the medical alcohol to clean the rubber before each test and clean the tested finger with alcohol before and after the test.（The rubber inside of the Oximeter adopts medical rubber, which has no toxin, no harm, and brings no side effect such as allergy to the our skin).
🎄SHIPPING:
1. We provide Tracking Code for all transactions. It will update the shipping information. Please don't worry about your order.
🎄FEEDBACK:
1. we succeed depending on your satisfaction. Therefore, your feedback is extremely important to us.
2. If you think our items is helpful, please leave us your positive feedback (Five Star). Thanks a lot!!! With your encouragement, we will continue to upgrade and optimize our products.
