Handle diameter: 2.35mm
Grinding head diameter: 11mm
Length of grinding head: 30mm
Usage: both dry and wet, wet grinding is recommended (to avoid powder blocking sandpaper and increase service life)
Grits: 180, 240, 320, 400, 600, 800, 1000 1200, 1500, 2000, 2500, 3000, 5000
Thickness: the lighter the color, the finer the sandpaper
Uses: for all kinds of stone, jade, agate, emerald, glass, mold, electronics, glass
Polishing of gold and silver jewelry, metal, non-metal surfaces, grooves, tapered concave surfaces, etc
Warm reminder:
1. Both dry and wet, it is recommended to use wet grinding to avoid powder blocking sandpaper, which is more durable;
2. Please use the sandpaper stick at a low speed. It is recommended that the speed be 2000-5000rpm. Do not use the sandpaper stick at a high speed;
3. Do not grind to the adhesive paper part at the bottom when using, otherwise the sandpaper will spread;
4. Whether the new equipment is shaken after the electric grinding test. The operation cannot be carried out when shaking, and the commissioning shall be carried out until there is no shaking
Sandpaper is tightly wound, the glue injected at the bottom is not easy to disperse, and the sandpaper rod head is lengthened, so that the sand grains are fine and uniform.
With 2.35mm shank diameter, it is suitable for pneumatic and electric rotary grinder, electric grinder and hanging grinder.
20 #-400 #: It is often used for secondary grinding of coarse grinding, and some with low requirements can be directly polished and formed.
600#-1500#: It belongs to the fine range, aiming at polishing high-end furniture, amber, bodhi and gold.
2000#-3000#: The technology is required to reach a certain level, which is mainly used for fine polishing, which can remove dead skin and polish nails, etc.
5000#: With unique nanotechnology, the surface granularity is extremely fine, which is mainly used for fine polishing of high-grade products.
