CC1101 Wireless Module With SMA Antenna Wireless Transceiver Module For Arduino 433MHZ

Product name: CC1101 wireless module

RF chip: CC1101

Center frequency: 10mW

Communication distance: 380 meters

Working voltage: 1.9-3.6VDC to meet the needs of battery power supply.

01:

02: Production process placement machine placement

03: Interface method 2*4*2.54 (Universal board Dupont wire can be used)

04: Voltage 1.8V-3.6VDC

05: Communication level: 07VDD-3.6VDC

06: The measured distance is greater than 380 meters (depending on the environment with or without obstacles)

07: Maximum power 10dpm (about 10mw)

08: Air rate 1.2kbps-500kbps (due to the physical characteristics of 433, it is recommended not to exceed 20kbps)

09: Emission current 29.2mA (peak)

10: Receiving current: 14.7mA

11: Communication interface: standard SPI interface, mode 0, communication rate up to 10Mbps

12: Single data packet 1-32 bytes, level 3 FIFO buffer

13: RSSI support

14: Working temperature: -30 degrees-85 degrees

15: Working temperature: 10%-90%

16: Storage temperature: -40 degrees -125 degrees

17: Working frequency band: 387MHz-464MHz (can be adjusted by software, 433 is recommended (plus or minus 10%)

18: Receiving sensitivity: -117dpm@250kbps