Caravan Motorhome Autofill Mains Water Adapter Replacement Float Valve For Aquaroll Aquaruis Rolly Poly
Description：
These kits are just the job when you are on a fully serviced pitch no more filling the aquaroll 4 or 5 times a day more time to relax and enjoy your break
Fitments：
FITS AQUAROLL , AQUARIUS, ROLY POLY WATERHOGG
Features:
the valve can deal with pressures upto 60psi and keeps a permanent 20 litres in your aquaroll ,plus pressure reducer for high water pressure sites.
will not flood your van like some other designs in the unlikely event of valve failure it is desinged to flow out of the top of your aquaroll.
it comes tested and set up in the correct position for aquaroll just screw in connect your own hose using the hozelock type pushfit connector and the other end to the water supply .
as pictured supply your own hose pipe dosent come with a aquaroll please note it only fits the containers with side cap
please note this wont fit the new 51 litre waterhog please see my other listing
Here are some basic instructions for use
1. Position your Aquaroll/Water Hog in its normal position at the side of the caravan
2. Remove the caps from the top and the side of the Aquaroll/Water Hog
3. Insert the float valve assembly into the side opening of the Aquaroll/Water Hog and secure the attached screw cap.
4. Drop your submersible pump into the water connector in through the top opening of the Aquaroll / Water Hog as normal.
5. Connect the end of the hose with the water stop connector to the male connector on the ball valve assembly.
6. Connect the other end of the hose to the mains water tap using adaptors.
7. Turn on the tap and the Aquaroll will start to fill with fresh water.
8. As the water level rises the float valve will close, shutting off the water supply.
9. As you draw water from the Aquaroll via the caravan s water pump the valve will open maintaining a volume of about 20 litres of fresh water within the Aquaroll / Water Hog.
Package Includes：
1set x replacement float valve kit
