VLT 85% Transparent Light Blue Chameleon Car Windshield Foils, Glass Tints Windscreen Protection Solar Window Tinting Film

Hign-concerned Chemical : None Position : Front Windshield Special Features : Scratch Resistant Material Type : PET Item Weight : 0.4kg Item Width : 76cm Item Length : 3m Color Name : blue External Testing Certification : CCC Window Foils Type : Front Window Solar Protection Transmittance : 80%-100% Heat Insulation Rate : 80%-100% Ultraviolet Blocking Rate : 80%-100%

Origin : Mainland China Item Type : Window Foils & Solar Protection Thickness : 0.01MM

Read before you buy!!! --- ** Because the production batches of the products are different, the visible light transmittance of products will have a slight deviation between 1-10%. thank you for understanding.**It's thickened and a little hard. so it is not easy to shrink. The thicker the thickness, the more difficult it is to install.you can touch it and compare with other films. it is a little thicker than ordinary films.  This is for car window stickers. This Chameleon film thickness is 0.01mm(2mil). Common sense that the thicker the thickness, the harder for installation. The thickness of ordinary window stickers is only between 1.3 and 1.5mil. Please use much more soapy water to wet the window glass and film (both sides of film) if you find it difficult to move.

don't forget to heating the film on outside windshield before apply to inside windshield."heating film" is a step to make the film to have shape of curvy glassread the Description and watch this video in this link https://www..us/item/1005006019407664.html?gatewayAdapt=glo2usaINSTRUCTIONS:Notice: Measure the size of the car glass, the length and width of each one plus more than 3 cm, so as not to install the film  does not conform to size.A clean window is vital a successful factor,so keep window or glass clean.The first step : put the film outside of the window and heating the shape offilm. don't peel off the backing in this step. refer to this videohttps://we.tl/t-Crhk1gtsVqheating time is half an hour.The second step: remove your old film in the car, Clean the glass withSpecialized degumming detergent. Clean the glass at least three times to ensurethat all old glue is removed.The third step: refer to this installation video https://we.tl/t-U3mQISBJeLNOTE:1.Before installing , please check the film carefully,if you find any creases,tears or other defects,please contact us immediately for advice.Don’t remove the backing sheet or attempt to fit your film .We are unable to accept returns or provide refunds if installation has been attempted.2. After installation, don't wash car and don't drive in the rainy day.Specification:1.Material:PET3. Visible Light Transmittance rate （VLT）: 85% 4. UV protection (UVR):100%5. Heat Insulation(IRR): 95%6. Thickness: 2mil7. Production process: Nano ceramics8: color: transparent to blue  Packing Includes:1 roll car window film