Novastar MSD300 Transmission Card LED Display Synchronization Control Card with Software Configuration Instructions (Updated Version)

We offer a wide variety of products, and the following precautions apply to some of them. Please note that they are listed for all products. 【Voltage Compatibility】Designed for Japanese voltage (90-110V). Using with a different voltage may cause malfunction. 【Plug Type】Japanese plugs (A or B type). Use a conversion adapter if needed. 【Transformers & Adapters】Transformers adjust voltage; adapters only change plug shape. Using an adapter without a transformer may damage the product. 【Liability】We are not responsible for damages caused by improper use, such as using the product without a transformer. 1 DVI video input, 1 audio input. 2 Ethernet port outputs. USB control interfaces can be cascaded for uniform control. Single sending card supports resolutions of 1280x1024, 1024x1200, 1600x848, 1920x712, 2048x668. 1 Light sensor interface. Product description: Novastar MSD300 is a shipping card for the Novastar Mars M3 platform. This product also has an aluminum enclosure interior under part number MCTRL300. Product specifications: Product type: Shipping card Capacity: 1.3 million pixels. Supply voltage: 5.0V. Control method: USB interface. Video interface: DVI. Audio interface: 3.5mm Video format: RGB. Output interface: 2 Ethernet ports. Video resource bit depth: 8 bits. Light sensor interface: 1. Certification: RoHS, CE. Usage tips: LED indicator. Red light: Lights up when the device is working normally and blinks during authentication. Green light: Blinks slowly if there is no video source. (The light will be on for 2 seconds and off for 2 seconds.) Normally blinks when a video source is available. (blinks approximately 2 times per second). When the startup screen appears, it will blink rapidly. With redundancy, the indicator gradually fades. Software is available if needed.