Niceden Dentals Lamp LED Curing Machine 1 Second Ultra High Light Intensity Dentistry Instrument Tool

Technical Parameters:

Light Source: Broad Band LED;

Wavelength Range: 385 - 515 nm;

Light Intensity: > 2300mW / cm²;

Battery: Lithium-ion battery (total running time when the battery is fully charged: at least 110 minutes);

Power Adapter Input Power: AC 100-240V 50 / 60Hz;

Charging time: about 90 minutes;

Size:Handle: Φ20 mm × 230 mm; Charging stand: Φ63 mm × 30 mm (all of the above are the largest size)

Weight: Handle: 100 grams; Charging seat: 150 grams;

Operating ambient temperature: + 10℃ - + 40℃(+ 50 °F - + 70°F);

Operating relative humidity: 30% - 75%;

Operating environment pressure: 700hPa - 1060hPa;

Package Contents:

1 × host handle;

1 × charging base;

1 × power adapter;

1 × user manual.

NOTE:

1.Please allow 1-3cm error due to manual measurement. Please make sure you do not mind before you bid.

2.The colors may have different as the difference display, please understand.

Features:

Thank you for choosing our LED light curing machine. This instrument takes the high power pure blue LED as light source. It's

the new light curing machine which used with enhanced modespot opticalfiber light sticks.

1.LED light curing machine adopts the light-emitting diodes Blue-ray, it cancure the resin with the wavelength of 420-480nm, and be used to repair the teeth in the

department of stomatology;

2.There are three solidification working light modes: strong light mode, flashing light mode, gradual light mode.

3.The light-emitting diodeshas long life, which can greatly reduce the costs of future maintenanceof the machine;

4.Its does not produce any heat when running, so no needto cool it with fan, thus, it is free from the annoyance of noise

andvibration of traditional machines

5.Thehigh capacity lithium ion batterycan lastabout130-200 times after being fully charged(4-8 hours). 6.Intelligentbattery

detection circuit function:when batteryis low, itwillalarm and the light will flash. 7.Lightweight and two-stage design, first

low-lightirradiation, and then glare rapid curing.

6.This can inhibit the excessive contraction of the resin surface, avoidcracks between cavities edge.