Feature:
1. Multifunctional circuit tester for voltage and polarity tests, continuity tests, signal circuit tests, poweractivation components, trailer lights and connection tests. Test vehicle battery voltage, AC and DC voltage tests, resistances, leaks, short circuits, component activation overload protection with large battery clamp, etc., able to withstand greater loads. It supports a wide input voltage range of 9V?70V, can be used for 12V car and 24V trucks.
2. Made of high quality plastic materials, environmentally friendly and non?irritating. Low power consumption, high performance. Comes with a 10m32.8ft extension cable allows you to test car or truck.
3. Designed with an easy to navigate user menu, you can read DC voltage, AC voltage, resistance and diode parameters clearly. The DC voltage mode is used to read the DC voltage at a resolution of 0.1 volts; AC voltage mode for reading maximum voltage, minimum voltage and frequency; The resistance mode is used to read the resistance between the tip and the auxiliary ground .
4. With automatic circuit breakers, safe and sustainable to use, and short?circuit protection prevents overload of equipment. Before you start testing circuits or components, you must do a quick self?check to insure that your tool is in good condition.
5. It can determine at a glance whether the circuit is positive, negative or disconnected without having to reconnect the clamp from one battery pole to another. By depressing the power switch, conduct a positive or negative battery current to the probe tip for testing the function of an electrical component without the use of jumper wires.
Specification:
Condition: 100percent Brand New
Item Type: Automotive Diagnostic Tool
Material: Plastic
Function:
Voltage and polarity testquickly determine DC AC voltage and positive negative.
Resistance continuity testLCD screen displays resistance value.
AC circuit signal testquickly solve the problem of the sensor circuit.
Activation of components in your hands, on the vehicle or on the ground.
Test trailer light and connect 10M extension cable allows you to test car or truck.
Check for poor grounding and look for short circuits
Specifications:
Display: TFT color display (160 x 128 dpi)
Operating Temperature: 0 to 60 celsius (32 to 140 Fahrenheit )
Storage Temperature: 40 to 70 celsius (40 to 185 Fahrenheit )
External power: 12.0 or 24.0 V power provided by vehicle battery
Test Tool Specifications:
DC voltage range: 065V +1 bit
Resistance range: 0200 K ohm
Frequency response:0Hz to 10K hz
Circuit Breaker
Rating current: 110 Amp
Standard Test:
100percent Current: no trip
150percent Current: Trip within one hour
200percent Current: trip within 330 seconds.
300percent Current: Trip within 0.54.0 seconds.
High Performance Electrical Circuit Tester:
12V car24V Trucks
Resistance test
Overload protection
Components activation
10M extension cable
AC and DC voltage test
Professional diagnosis
Signal Circuit Testing:
For Example,you suspect there is a problem with your M.A.P sensor circuit,then follow the procedure involved with testing this sensor:
Set the tool in AC voltage mode,using the probe tip with chassis ground .
Connect vacuum pump to MAP sensor.
Contact the probe tip to the MAP sensor positive terminal and observe the LCD readings which should be a sine in normal condition.
Apply vacuum..
Package List:
1 x Detector 1 x Extension Cord 1 x Clip Cable1 x Cigar Lighter Line 1 x Receiver 1 x Receiver Cover 1 x Manual 1 x Toolbox
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. Multifunctional circuit tester for voltage and polarity tests, continuity tests, signal circuit tests, poweractivation components, trailer lights and connection tests. Test vehicle battery voltage, AC and DC voltage tests, resistances, leaks, short circ
Made of high quality plastic materials, environmentally friendly and non?irritating. Low power consumption, high performance. Comes with a 10m32.8ft extension cable allows you to test car or truck.
Designed with an easy to navigate user menu, you can read DC voltage, AC voltage, resistance and diode parameters clearly. The DC voltage mode is used to read the DC voltage at a resolution of 0.1 volts; AC voltage mode for reading maximum voltage, minim
With automatic circuit breakers, safe and sustainable to use, and short?circuit protection prevents overload of equipment. Before you start testing circuits or components, you must do a quick self?check to insure that your tool is in good condition.
It can determine at a glance whether the circuit is positive, negative or disconnected without having to reconnect the clamp from one battery pole to another. By depressing the power switch, conduct a positive or negative battery current to the probe tip
