Feature
*This product RF1101SE micro -power wireless number transmission module, uses TI's high -performance CC1101 wireless communication chip (the improved version of the CC1100 chip, is better than CC1100, and seamlessly replace it. The program is exactly the same).)
*The large transmission rate can reach 500kbps, supporting 2-FSK, GFSK and MSK modulation methods. And the software can modify the baud rate, which can be transferred to 200-300 meters widely
*With wireless wake-up and other functions, the sensitivity reaches -110dbm, high reliability
*It can be widely used in the field of short -distance wireless communication in various occasions (such as wireless metering, industrial remote control, low -power hand -holding equipment, etc.)
*High sensitivity, 1.2kbps under -110dbm, 1 % data packet error code rate
Specification
Working voltage: 1.8V ~ 3.6V, recommended 3.3V work
Frequency: Work in the 433MHz frequency band exemption permit use
Built -in hardware CRC: check the wrong and point to the multi -point communication address control
Current consumption: RX, 15.6mA, 2.4kbps, 433MHz
Output power of programmable control: all support frequency can reach+10dBM
Frequency jumping system: yes
Module software Settings: Yes, from
Interface: Standard DIP spacing
Actual transmission distance: can reach more than 200 meters (depending on the specific environment and communication baud rate, etc.)
Package included
1* Wireless Module
1*Antenna
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
