Banana Pi BPI-R3 smart router

Products include:

1pcs BPI-R3 board 1pcs BPI-R3 metal case 1pcs BPI-R3 power supply 8pcs 5DB WIFI Antenna A variety of matching packages are available

BPI-R3 Size: length 17cm wide 12cm high 3cm

BPI-R3 Metal Case Size: length 18.8cm wide 12cm high 4.5cm

======================================

About Banana Pi BPI-R3 Introduction Banana Pi BPI-R3 Router board with MediaTek MT7986(Filogic 830) quad core ARM A53 + MT7531A chip design ,2G DDR RAM ,8G eMMC flash onboard,It is a very high performance open source router development board,support Wi-Fi 6 2.4G wifi use MT7975N and 5G wifi use MT7975P, support 2 SFP 2.5GbE port, and 5 GbE network port.

Note: this board doesn't have HDMI interface

=====================================

MediaTek MT7986(Filogic 830) ------------------------------------------ The MT7986(Filogic 830) integrates four Arm Cortex-A53 cores up to 2GHz with up to 18,000 DMIPs of processing power and 6Gbps of dual 4x4 Wi-Fi6 connectivity. It has two 2.5g Ethernet interfaces and serial peripheral interfaces (SPI). Filogic 830‘s built-in hardware acceleration engine enables fast and reliable Wi-Fi offloading and wireless network connection. In addition, the chip supports Mediatek FastPath™ technology, which is suitable for games, AR/VR and other low-latency applications.

Wi-fi 6 has many advantages over its predecessors, including lower latency, larger bandwidth capacity and faster transmission rates. Wireless network devices supporting the 6GHz band mainly use 160MHz wide channel and 6GHz uncongested bandwidth to provide multigigabit transmission and low-latency wi-fi connection, providing reliable wireless network for streaming media, games, AR/VR and other applications.

======================================

Application direction . Internet service Router . Wireless Router . Wireless Repeater . Home security Gateyway . Home Automation . Nas device . Network and communication applications

=======================================

Key Features ------------------------------------- . MediaTek MT7986(Filogic 830) Quad core ARM Cortex A53+MT7531 chip design . Wifi 6 4x4 2.4G Wifi(MT7975N) +4x4 5G Wifi(MT7975P) . 2G DDR RAM . 8G eMMC flash . 2 SFP 2.5GbE . 5 GbE network port . POE support (optional) . Mini PCIe via USB . M.2 KEY-E PCIe inerface . Mciro SD card interfact . 26 PIN GPIO

======================================

HardWare Specification of Banana pi BPI-R3

CPU MediaTek MT7986(Filogic 830) Quad core ARM Cortex A53+MT7531 chip design SDRAM 2 GB DDR4 On board Storage MicroSD \(TF\) card,8GB eMMC onboard GPIO 26 Pin GPIO,some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S. On board Network 5 Port 10/100/1000Mbps Ethernet SFP 2 SFP 2.5GbE Wifi Wifi 6 4x4 2.4G Wifi(MT7975N) +4x4 5G Wifi(MT7975P) mini PCIE Mini PCIe via USB M.2 interface M.2 KEY-M PCIe inerface USB 1 USB 3.0 host ,2 USB interface with slot. Buttons Reset button,WPS botton, boot switch Leds Power status Led and RJ45 Led DC Power 12V/2A with DC in Sizes 100.5x148mm same as Banana Pi BPI-R64 and Banana Pi BPI-R2 Weight 200g

Demo Board Type: ARM Memory Capacity: 2GB Model Number: BPI-R3