1W-75W Wireless Battery Soldering Iron Usb Portable Rechargeable Soldering Iron

Nstructions for use 1: Tighten the tip (appropriate tightness) and press 5 times within 2 seconds. (The indicator light flashes a few times) 2: Press and hold the power button to act as a soldering iron. Release it to stop working. 3: Press and hold the power button for more than 10 seconds. The battery will activate the timeout protection feature. It is recommended to press and hold for 7-8 seconds, then press (loop this operation) 4: Display indicator according to battery level. The remaining lights indicate that the battery needs to be charged and the charge status indicator will flash. The four lights do not flash, indicating that they are fully charged. 5: Need to close and press 5 times in succession. The resistance of the soldering iron tip is 1.5 ohms. It's not 2.8 ohms of 8W. The lower the resistance, the greater the power. The threaded interface is 510 interface. M7*0.5mm thread. If you need more power, please contact customer service, thank you

Package Included: 1Set

Note: Please allow minor error due to manual measurement. The colors may be a little difference for the different monitor display. The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.