WAINLUX L6 Laser Engraver 10W Laser Power High-speed Air Assist 320x350mm Engraving Area All-metal

Features: ? 10W Laser Engraving machine: Adopt 10W laser power, able to cut 5mm plywood at one time; Engraving accuracy up to 0.05mm for more detailed carving. 320x350mm large work area to satisfy your creating needs. ? Easy to Install & Focus: The entire structure has been designed for quick assembly, module structure design makes convenient to disassemble. Focus column can help you focus immediately. The V wheel + metal guide rail and closed timing belt make the laser machine run more smoothly and stably. ? Wide Application: Adopt semiconductor laser, can easily carve a variety of materials such as leather, ceramic, lacquered metal, paper, bamboo, wood, plastic, etc. ? Widely Compatibility: This machine works well with LightBurn and LaserGRBL, supports Windows and MacOS, engraving file supports JPEG/BMP/PNG/JPG/GIF. ? Safe Protection Design: equipped with anti-tilt protection Sensor, which can stop work urgently if any abnormality is found in carving. ? Powerful High-speed Air Assist: Equipped with a high-speed air assist nozzle. Advanced fluid mechanics design to better utilize the air pressure. When using the same air compressor, the S10 spray airflow faster. For example, when using 30L/min, 0.03Mpa air compressor, the S10 nozzle will spray high-speed airflow up to 14.5m/s. This will greatly improve the cutting penetration and cutting efficiency. Specification: Model: L6 Material: High strength aluminum (anodized)+ABS engineering plastics Voltage: 100-240V Product Size: 580x530.5x154mm/22.8x20.8x6in Product Weight: 3.4kg/7.4kg Engraving size (mm): 320x350mm Assembly time: Modular assembly can be completed within 15 minutes after the end customer receives the product Machine power Electric power: <60W Engraving accuracy: 0.05mm Laser Power: 10W Wavelength: 455nm Focusing method: Knob fixed focus Laser module focusing type: spot compression Laser module life: about 10000h at 27degrees C ambient temperature Engraving speed: <150mm/s Motor: stepper motor Motor driver: stepper motor driver chip Processor: 32-bit high-speed MCU Cuttable material: cardboard, wood, etc. Materials that can be engraved: most non-transparent materials such as cardboard, wood, cloth, leather, stone, ceramics, stainless steel (light spot compression can be used); transparent materials such as glass can also be engraved after blackening. (Note: The specific effect depends on the laser module used) Package Size: 580.5x280x180mm/22.8x11x7in Package Weight: 5.4kg/11.9lb Note: Please read the user manual carefully before using. Packing List: 1 x L6 Laser Engraver Kit