Outer pipe outer diameter: 24mm, number of drive shaft teeth: 7, drive shaft shape: spline, weight: 650g, shaft diameter: 8mm (usually applicable to 6-8mm shafts)
This gear case is compatible with most domestic and foreign mower models with 24 mm pipes and drive shafts with 7 teeth, but it is necessary to check whether it is compatible before purchasing.
How to select parts from a brush cutter: Check the outside diameter of the brush cutter's rod and the shape of the transmission shaft, then select the compatible replacement part. If you are unsure, please contact the seller. Maintenance method: After use, please clean and dry the grass juice and water in the gear case.
How to install: Remove the fixing bolt and anti-rotation bolt on the brush cutter's gear head, remove the rod from the gear head, and install the replacement item.
Note: In order to attach the gear case to the brush cutter, it may be necessary to drill holes in the brush cutter. 2. After 3 hours of use, it is necessary to add grease, otherwise the gears will wear out and the service life may be shortened. When removing the grease port screw, you can save labor by using a power tool or a large screwdriver, and the direction is counterclockwise. We also handle gear cases with pipe diameters of 24/25/26/28 mm and number of teeth of 4/7/9/10/11/13. If necessary, please contact the seller.
Outer pipe outer diameter: 24mm, number of drive shaft teeth: 7, drive shaft shape: spline, weight: 650g
This gear case is compatible with most domestic and foreign mower models, so please check compatibility before purchasing.
How to select parts from brush cutter:
Check the outer diameter of the brush cutter's rod and the shape of the transmission shaft, then select a compatible replacement. If you are unsure, please contact the seller.
How to install:
Remove the fixing bolt and anti-rotation bolt from the brush cutter's gear head, remove the rod from the gear head, and install the replacement item.
Note:
In order to attach the gear case to the brush cutter, it may be necessary to drill holes in the brush cutter.
When removing the grease port screw, you can save labor by using a power tool or a large screwdriver, and the direction is counterclockwise.
