For Vw Golf 4 Chrome Side Door Trim 4 Door 1998-2004 P. Steel

Product Features: Chrome products are produced with a mold system specifically for the part where they will be applied on the vehicle. Chrome products are produced from class A 304 quality stainless steel. The products are shipped ready for installation with high quality double-sided acrylic tape on the back. Assembly Instruction: 1- Install in a dry and dust-free environment. 2- During installation, the ambient temperature should be between 15C and 35C. If the ambient temperature is below 15C, do not dry the surface with a hair dryer, etc. Install by heating with . 3- Before removing the tapes of the part to be bonded, first try the assembly, starting from the oval and closed surface. 4- Clean the surface to be bonded meticulously with a cotton cloth, rubbing alcohol or pure alcohol. After cleaning the surface to be bonded, protect it from dust and oil. DO NOT clean the surface to be bonded with oily or additive substances such as wet wipes, water, thinner, gasoline, diesel oil, cologne. 5- After cleaning the surface to be bonded, wait 5 minutes and then start the bonding process. 6- Remove the protective surface of the double-sided tape on the product and assemble it, starting from the oval and closed surface. 7- During the assembly process, pat the product with a soft cloth or fingertips to make it fit. Press on the part for a minute and again with a hair dryer etc. Apply heat using . CAUTION: Since the tape used will show its full properties within 24 hours, use the glued part carefully during this period. To prevent the glued part from loosening, tape it with paper or packaging tape that you can remove after 24 hours. Be careful not to wash your vehicle within 24 hours. WE WISH YOU HAPPY SHOPPING...